Modelování vtokových vírů
| Autor: | Galuška, Jiří |
|---|---|
| Jazyk: | čeština |
| Rok vydání: | 2017 |
| Předmět: |
turbulence modelling
analytická definice víru vícefázové proudění gas core length determination určování délky víru turbulence. návrh mokré čerpací jímky multiphase flow OpenFOAM wet sump design analytical definition of vortex interFoam ANSYS Fluent curvature correction. surface vortex Numerical model Numerický model hladinový vír Volume of Fluid |
| Druh dokumentu: | masterThesis |
| Popis: | This paper covers information research of basic design rules of industrial wet sumps. It describes mathematical models of vortices and method for their identification and visualization. Then the author focuses on CFD modeling of surface vortices with single phase and multiphase approach with Volume of Fluid method. Basic principles of multiphase CFD modelling in OpenFOAM and ANSYS Fluent are given. Description and benchmarking of suitable turbulence models is also present. The single phase and multiphase approach were successfully validated for a simple test case of bathtub surface vortex. Satisfactory agreement with experimental data was achieved. The accuracy and behavior of both solvers were compared between each other. This gives us useful tool for evaluation of inflow condition and danger of surface vortex occurrence in wet sumps. The acquired knowledges were used to design an experimental test case with geometry similar to industrial wet sump. A map of surface vortex occurrence has been created for different operating points. One of the operating point has been used for numerical simulation (both single phase and multiphase). Partial agreement with experimental observation has been achieved. |
| Databáze: | Networked Digital Library of Theses & Dissertations |
| Externí odkaz: |
|