| Popis: |
The thesis deals with methodology proposal for shape and dimension measurement of rotationally symmetric forgings. Most of available non-contact systems are not possible to use for this purpose, mainly due to high temperatures and large dimensions of forgings. Only a few commercial systems which are designed for this specific measurement are currently in the market. These systems are based on a principle of evaluating time response of posted modulated signal. However, scientific literature shows also other approaches to the measurement, which are based on principle of triangulation and methods of image analysis. Advantage of systems based on these principles should be especially measurement speed and significantly lower price. The paper describes current state of research and development in this area and proposes a new approach which is based on passive photogrammetry and image analysis. The core of the work is devoted to the design of partial methods and their implementation in the Matlab programming language. Functionality of the methodology and the software has been verified by measuring cylindrical tubes of small dimensions in laboratory conditions. The designed methods were discussed and evaluated based on statistical analysis of the measurement results, and further steps to increase the accuracy and reduce the spread of results were suggested. Optimization and further development of this methodology could lead to the design a professional measuring system intended for this specific application. |
