| Popis: |
This Master´s thesis discuses the protection of data transmission against long error bursts. The data is transmited throught the channel with defined error rate. Parameters of the channel are error-free interval 2000 bits and length of burst error 250 bits. One of the aims of this work is to make a set of possible methods for the realization of a system for data correction. The basic selection is made from most known codes. These codes are divided into several categories and then the best one is chosen for higher selection. Of course interleaving is used too. Only one code from each category can pass on to the higher level of the best code selection. At the end the codes are compared and the best three are simulated using the Matlab program to check correct function. From these three options, one is chosen as optimal regarding practical realization. Two options exist, hardware or software realization. The second one would seem more useful. The real codec is created in validator language C. Nowadays, considering language C and from a computer architecture point of view the 8 bits size of element unit is convenient. That´s why the code RS(255, 191), which works with 8 bits symbols, is optimal. In the next step the codec of this code is created containing the coder and decoder of the code above. The simulation of error channel is ensured by last program. Finally the results are presented using several examples. |
