The development and operating characteristics of an improved plasma torch for supersonic combustion applications

Autor: Stouffer, Scott David
Rok vydání: 1989
Předmět:
Druh dokumentu: Diplomová práce
Popis: The design of the VPI plasma torch, which has been used as an ignitor and flameholder in supersonic combustion studies, has been modified in order to decrease the electrode wear and to increase stability. The plasma torch can be used as a source of hydrogen or nitrogen radicals which initiate and stabilize combustion. During previous testing of the unmodified torch, electrode erosion limited operation of the torch to about two hours. The improved torch features a flow swirler in the gas inlet, which adds vortex stabilization to the arc. The vortex stabilization causes the anode attachment point of the arc to be anchored in the low pressure region, downstream of the constrictor. This lowers the heat flux to the anode, so that erosion is decreased. The torch body was redesigned with an emphasis on the alignment of the electrodes. Also, the electrode gap in the improved torch was made continuously adjustable, allowing fine adjustment of the electrode gap during operation of the torch. The operational characteristics of the improved torch were monitored by a microcomputer-based data acquisition system. Stable operation of the improved torch with pure nitrogen was demonstrated, thus eliminating the requirement for argon to stabilize the arc. Operational characteristics of the improved torch running on argon, nitrogen, argon/hydrogen and argon/nitrogen mixtures as feedstocks, are reported. The electrode wear was studied between tests by observation with a microscope, and by measuring the mass change of the electrodes. The electrode erosion of the improved torch was reduced significantly. Anode lifetimes of greater than 20 hours have been demonstrated with operation on mixtures of nitrogen and argon.
Master of Science
Databáze: Networked Digital Library of Theses & Dissertations