Estimation of Runway Throughput with Reduced Wake Separation, Runway Optimization, and Runway Occupancy Time Consideration
Autor: | Li, Beichen |
---|---|
Jazyk: | angličtina |
Rok vydání: | 2022 |
Předmět: | |
Druh dokumentu: | Diplomová práce |
Popis: | This thesis estimates potential runway throughput gains using a reduced wake separation based on the 123 most prevalent aircraft in the United States fleet. The analysis considers Runway Occupancy Time (ROT) constraint factors and existing geometric design factors. This research extracts the historic data from Airport Surface Detection Equipment Model X (ASDE-X) for analysis. The Runway Exit Design Interactive Model (REDIM) is used to optimize the runway exit locations and reduce ROT. The runway throughput and safety factors are generated from a Monte Carlo runway simulator. This thesis focuses on selected US airport runways that could benefit from geometric optimization. The study aims to estimate ROT improvements through improved runway exit locations and the changes in runway throughput considering ROT constraint factors. The results of the thesis show that Dallas Fort Worth International Airport (DFW) runway 35C and Denver International Airport (DEN) runway 16R have the potential to improve the ROT. After the optimization to locate runway exits, the ROT time of the RECAT group F and G aircraft (greater than 90% of the arrivals) was reduced by three to five seconds (a very significant effect). After the ROT reductions and with the application of reduced wake separation criteria with the ROT constraint factor applied, the arrival-only capacity of DFW runway 35C improved by 3.5 arrivals per hour. The arrival-only capacity on DEN runway 16R improved by 2.14 arrivals per hour. Both runways maintained a probability of violation between time-based separation and ROT time at around 1.5%. The study concludes that the application of reduced wake separation criteria alone is a necessary but insufficient condition to improve the efficiency of arrival runways. Through careful improvements of runway exit locations, reductions in ROT provide reliability and efficiency to the operation of runways. Master of Science |
Databáze: | Networked Digital Library of Theses & Dissertations |
Externí odkaz: |