Dynamic Effects on Speed Reducers using Different Component Designs
| Autor: | Ching-Sheng Liu, 劉慶昇 |
|---|---|
| Rok vydání: | 2016 |
| Druh dokumentu: | 學位論文 ; thesis |
| Popis: | 104 In the study, we discuss two different designs of speed reducer. The first one uses cross-shape slider connecting cycloid gear and output shaft to construct the single-stage cycloid speed reducer. The second one is the design of two-stage cycloid bearing speed reducer. We disassemble the speed reducer manufactured by SPINEA and draw reference to its internal structures, and we drop out the components which are less influential. Moreover, on the part of the pinwheel and cycloid gear, we change to inside and outside dental occlusion way in order to reduce the reduction ratio. Although there are two different reducer designs, both of them use cross-shape connectors to transfer power. In this study, we first use Solidswords to construct two different designs of speed reducer. Then, we use the analytical software in the Solidworks to do dynamic simulation and stress analysis. Under the condition of giving different loads for each design, we analyze its components’ motion and stress during the operating process. At the end, we discuss the analytical results and the differences among two designs. |
| Databáze: | Networked Digital Library of Theses & Dissertations |
| Externí odkaz: |
|