Improvement of DSSC Efficiency by UV Irradiation and Zinc Oxide/Titanium Dioxide Heterojuction
| Autor: | Chih-chen Hsiao, 蕭稚臻 |
|---|---|
| Rok vydání: | 2010 |
| Druh dokumentu: | 學位論文 ; thesis |
| Popis: | 98 In this study, we used two types of materials as working electrode of DSSC, commercial TiO2 (P25) nanoparticle and ZnO nanotip. First part, we sintered TiO2 electrode in nitrogen and treat TiO2 electrode by UV light irradiation, in order to increase dye adsorption onto TiO2. Second part, we used three different buffer layers to grow ASD-ZnO nanotip as working electrode, sputtered-ZnO, sputtered-AZO and spin-coating TiO2. The hetrojuction is formed at the interface of ZnO nanotip/TiO2 buffer layers due to the different materials between ZnO and TiO2, which is beneficial for electron-hole separation. The morphology was measured by field emission scanning electron microscope (FE-SEM, Philip XL-40FEG). The sheet resistivity was measured by four-point probe. The crystallinity was examined by X-Ray diffraction (XRD, Simens D5000). Structural and spectral properties are characterized by ultraviolet-visible spectroscopy (UV-Vis) spectroscopy. The fourier transform infrared spectroscopy (FT-IR spectroscopy, BRUKER 66v/s) deals with the infrared region of absorption spectroscopy. And the Angilent B1500A is used for current-voltage (I-V) characterization of solar cells. In our results, we enhance the performance of TiO2 electrode DSSC, the open circuit voltage can reach to 0.56 V, the short circuit current density can reach to 16.65 mA/cm2, the conversion efficiency can reach to 4.6 % and the fill factor can reach to 49.2 %. On ZnO electrode, the open circuit voltage can reach to 0.57 V, the short circuit current density can reach to 4.43 mA/cm2, the conversion efficiency can reach to 1.21 % and the fill factor can reach to 47.9 %. |
| Databáze: | Networked Digital Library of Theses & Dissertations |
| Externí odkaz: |
|