Revestimentos a base de Ta/Al2O3 produzidos por aspers?o t?rmica sobre substrato met?lico

Autor: Mendes, Marcio Willians Duarte
Jazyk: portugalština
Rok vydání: 2011
Předmět:
Zdroj: Repositório Institucional da UFRNUniversidade Federal do Rio Grande do NorteUFRN.
Druh dokumentu: Doctoral Thesis
Popis: Made available in DSpace on 2014-12-17T14:07:05Z (GMT). No. of bitstreams: 1 MarcioWDM_TESE.pdf: 5811012 bytes, checksum: feda974076398f5c8fbcb84ae56af460 (MD5) Previous issue date: 2010-09-17
Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior
Metal substrates were coated by thermal spraying plasma torch, they were positioned at a distance of 4 and 5 cm from the nozzle exit of the plasma jet. The starting materials were used for deposition of tantalum oxide powder and aluminium. These two materials were mixed and ground into high-energy mill, then immersed in the torch for the production of alumina coating infused with particles of tantalum with nano and micrometric size. The spraying equipment used is a plasma torch arc not transferred, which operating in the range of 250 A and 80 V, was able to produce enough heat to ignite aluminothermic between Ta2O5 and aluminum. Upon reaching the plasma jet, the mixing powders react with the heat of the blaze, which provides sufficient energy for melting aluminum particles. This energy is transferred through mechanisms of self-propagating to the oxide, beginning a reduction reaction, which then hits on the surface of the substrate and forms a coating on which a composite is formed by a junction metal - ceramic (Ta +Al2O3). The phases and quantification of each were obtained respectively by X-ray diffraction and the Rietveld method. Morphology by scanning electron microscopy and chemical analysis by energy dispersive spectroscopy EDS. It was also performed measurements of the substrate roughness, Vickers microhardness measurements in sprays and determination of the electron temperature of the plasma jet by optical emission spectroscopy EEO. The results confirmed the expectation generated around the end product of spraying the mixture Ta2O5 + Al, both in the formation of nano-sized particles and in their final form. The electron excitation temperature was consistent with the purpose of work, in addition, the thermodynamic temperature was efficient for the reduction process of Ta2O5. The electron excitation temperature showed values of 3000, 4500 and 8000 K for flows10, 20 and 30 l / min respectively, these values were taken at the nozzle exit of the plasma jet. The thermodynamic temperature around 1200 ? C, was effective in the reduction process of Ta2O5
Substratos met?licos de a?o inox 416 foram revestidos por aspers?o t?rmica em tocha de plasma. Eles foram posicionados a uma dist?ncia de 4 e 5 cm em rela??o ao bocal de sa?da do jato de plasma. Os materiais de partida utilizados para as deposi??es foram p?s de ?xido de t?ntalo e alum?nio. Esses dois p?s foram misturados e mo?dos em moinho de alta energia, em seguida, imersos na tocha para produ??o de revestimento de alumina impregnada com part?culas de t?ntalo com tamanho nano e microm?tricos. O equipamento de aspers?o utilizado foi uma tocha de plasma de arco n?o transferido que opera na faixa de 250 A e 30 V. Ao atingirem o jato de plasma, os p?s da mistura aquecem at? a temperatura de igni??o da rea??o aluminot?rmica. O calor gerado fornece energia suficiente para a fus?o do produto da rea??o. Esse produto fundido ao chocar-se na superf?cie do substrato forma um revestimento composto por uma jun??o metal cer?mica (Ta + Al2O3). A identifica??o das fases e sua quantifica??o foram obtidas respectivamente por difra??o de raios X e pelo m?todo de Rietveld. Para determina??o da morfologia e composi??o das part?culas foram utilizados microscopia eletr?nica de varredura e an?lise qu?mica por espectroscopia de energia dispersiva EDS, respectivamente. Tamb?m foram executadas medidas de rugosidades no substrato, medi??es de microdureza Vickers nas aspers?es e determina??o da temperatura eletr?nica do jato de plasma por espectroscopia de emiss?o ?tica EEO. Os resultados obtidos confirmaram a expectativa gerada em torno do produto final da aspers?o da mistura Ta2O5 + Al, tanto na forma??o de part?culas nanom?tricas de t?ntalo quanto no formato final delas. A temperatura de excita??o dos el?trons apresentou valores de 3000, 4500 e 8000 K para fluxos de 10, 20 e 30 l/min respectivamente, esses valores foram tomados na sa?da do bocal do jato de plasma. A temperatura termodin?mica, em torno de 1200 ?C mostrou-se eficiente para o processo de redu??o do Ta2O5
Databáze: Networked Digital Library of Theses & Dissertations
Externí odkaz: