| Autor: |
Tiago Cavalcanti Rolim |
| Jazyk: |
angličtina |
| Rok vydání: |
2009 |
| Předmět: |
|
| Zdroj: |
Biblioteca Digital de Teses e Dissertações do ITAInstituto Tecnológico de AeronáuticaITA. |
| Druh dokumentu: |
masterThesis |
| Popis: |
This work presents the results of shock tunnel tests of a Mach 10 waverider with sharp leading edges. The waverider surface was generated from a conical flowfield with the volume and the viscous lift-to-drag ratio as optimization parameters. A compression and expansion ramps were added to the pure waverider surface in order to simulate the flow over a scramjet engine. The compression ramp was designed so as to provide the ideal conditions for the supersonic combustion of the Hydrogen while the expansion section was derived from an ideal minimum length supersonic nozzle. The experimental data included Schlieren photographs of the flow and the pressure distribution over the compression surface. These data were compared with the inviscid theory. During these investigations, the IEAv's T3 shock tunnel was used to simulate the hypersonic flow. The stagnation conditions as well as the free stream properties were estimated using numerical codes. The tunnel operated at Mach number ranges of 8.9 to 10, Reynolds number from 2.25 x 106 to 8.76 x 106 (m-1) and Knudsen number from 0.06 to 0.19. From the Schlieren photographs it was noted that the inlet flowfield behaves according to the predictions of the hypersonic viscous interaction models. Also, the pressure variation along the compression surface centerline was obtained using piezoelectric pressure sensors. The resulted profile presented the general trend of the flow described by these models. |
| Databáze: |
Networked Digital Library of Theses & Dissertations |
| Externí odkaz: |
|
