| Autor: |
Thieme, Michael, Bergner, Frank, Haase, Ingrid, Worch, Hartmut |
| Jazyk: |
angličtina |
| Rok vydání: |
2013 |
| Předmět: |
|
| Zdroj: |
O. Forsén, J. Aromaa, L. Selin (Hrsg.): KSCS 2004, 4th Kurt Schwabe Corrosion Symposium : mechanisms of corrosion and corrosion prevention ; proceedings ; June 13-17, 2004, Helsinki University of Technology, Espoo, Finland, S. 103-111, ISBN: 951-22-7133-8 |
| Druh dokumentu: |
Text<br />Conference Material |
| Popis: |
One of the serious problems encountered in the use of various materials in technology is the occurrence of fatigue phenomena as an undesirable material damage under cyclic mechanical load. For aluminium alloys this issue is of extremely high importance in case of their utilisation for aircraft purposes, e.g., where a very wide spectrum of frequencies occur. Moreover, the cyclic loading may be joined by the presence of specific electrolyte media. Therefore, the material candidates must be thoroughly examined in view of their sensitivity to fatigue as well as to corrosion fatigue. Usually, the Cu-containing alloy EN-AW 2024 T3 is applied besides 7075 T6 in Airbus aircrafts, but the weldable alloy 6013 T6 is considered to be a potential alternative. Referring to former investigations on the environmental sensitivity (ES) in the fatigue behaviour /1-6/ this paper brings up experimental findings as well as expanded considerations about damaging mechanisms and modelling. The situation with the alloy 6013 T6 is emphasized. The propagation of cracks under cyclic load in different environments, such as vacuum, air or aqueous media, is described by means of fracture mechanics. This enables discrimination in view of the influence of environmental factors and, hence, the participation of corrosion processes. |
| Databáze: |
Networked Digital Library of Theses & Dissertations |
| Externí odkaz: |
|
