| Popis: |
The presented research report deals with the investigation of magnesium aluminum based layered double hydroxide (LDH) as a potential nanofiller and flame-retardant for polymers with special reference to polyethylene. LDH is a mixed hydroxide of di- and trivalent metal ions that crystallizes in the form of mineral brucite. The basic reason for selecting LDH or more specifically magnesium-aluminum based LDH (Mg-Al LDH) is their typical metal hydroxide-like chemistry and conventional clay-like layered crystalline structure. The former is helpful in the direct participation in flame inhibition through endothermic decomposition and stable char formation. On the other hand, the later makes LDH suitable for polymer nanocomposite preparation, which can address the poor dispersibility problem associated with conventional metal hydroxide type fillers in polyolefin matrix. Besides, unlike layered silicate type clays (often reported for their capability to improve flame retardancy of polymers), LDH being reactive during combustion has higher efficiency to reduce the heat released during combustion of the composites. LDH clay with fixed Al:Mg ratio was synthesized using urea hydrolysis method and characterized. The organic modification of Mg-Al LDH using anionic surfactants has been studied in details. The main purpose of such modification is to enlarge the interlayer distance and to render it more organophilic. The surfactants were selected based on their functionality, chain length, etc and the modification was carried out by regeneration method. In the modified LDHs, the surfactants anions are arranged as a monolayer in the interlayer region and expand the interlayer distance according to their tail size. PE/LDH nanocomposites were prepared by melt-compounding method using a co-rotating tightly intermeshed twin-screw extruder and the morphological, mechanical and flammability properties of the nanocomposites were investigated in details. The X-ray diffraction analysis and electron microscopic analysis show a complex LDH particle morphology with hierarchy of particle size and shape starting from exfoliated particles fragments to particle aggregates over few hundred nm size. The exfoliated LDH platelets are distributed both in the vicinity of large particles and also in the bulk matrix. The melt rheological characterization of the nanocomposites also reflects the similar complex particle morphology. The dynamic oscillatory shear experiments showed that with increasing LDH concentration, the rheological behavior of the nanocomposite melts deviates strongly from that of the unfilled polyethylene. Thermogravimetric analysis (TGA) shows that LDH significantly improves the thermal stability of the polymer matrix in comparison to the unfilled polymer. The flammability studies of the PE/LDH nanocomposites have been reported in terms of various standard methods, like limited oxygen index (LOI), cone-calorimetry and UL-94 vertical and horizontal burn tests. The cone-calorimetric investigation shows that the nanocomposites have significantly lower burning rate and heat released during combustion. With increasing concentration of LDH though the LOI value of the nanocomposite increases marginally, the burning behavior, like dripping, rate of burning, etc are significantly improved. The flammability performance of LDH in combination with other commonly used flame-retardant (magnesium hydroxide) was also investigated. It has been observed that in polyethylene, a 50 wt% combination filler (4:1 weight ratio of magnesium hydroxide and LDH) can provide similar flammability ratings (like V0 rating in UL94 test, no dripping, etc) as that observed with 60 wt% magnesium hydroxide alone. |
