An Alkali Activated Binder for High Chemical Resistant Self-Leveling Mortar
| Autor: | Funke, Henrik L., Gelbrich, Sandra, Kroll, Lothar |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2016 |
| Předmět: |
info:eu-repo/classification/ddc/620
ddc:620 Bindemittel Vergussmasse alkalisch aktiviertes Bindemittel Geopolymer Textilverstärkung Vergussmasse Technische Universität Chemnitz Publikationsfonds Alkali Activated Binder Geopolymer Durability Chemical Resistance Technische Universität Chemnitz Publication fund |
| Zdroj: | Open Journal of Composite Materials, 6, 132-142. doi: 10.4236/ojcm.2016.64013 |
| Druh dokumentu: | Článek |
| ISSN: | 2164-5655 |
| DOI: | 10.4236/ojcm.2016.64013 |
| Popis: | This paper reports the development of an Alkali Activated Binder (AAB) with an emphasis on the performance and the durability of the AAB-matrix. For the development of the matrix, the reactive components granulated slag and coal fly ash were used, which were alkali activated with a mixture of sodium hydroxide (2 - 10 mol/l) and aqueous sodium silicate solution (SiO2/Na2O molar ratio: 2.1) at ambient temperature. A sodium hydroxide concentration of 5.5 mol/l revealed the best compromise between setting time and mechanical strengths of the AAB. With this sodium hydroxide concentration, the compressive and the 3-point bending tensile strength of the hardened AAB were 53.4 and 5.5 MPa respectively after 14 days. As a result of the investigation of the acid resistance, the AAB-matrix showed a very high acid resistance in comparison to ordinary Portland cement concrete. In addition, the AAB had a high frost resistance, which had been validated by the capillary suction, internal damage and freeze thaw test with a relative dynamic E-Modulus of 93% and a total amount of scaled material of 30 g/m2 after 28 freeze-thaw cycles (exposure class: XF3). |
| Databáze: | Networked Digital Library of Theses & Dissertations |
| Externí odkaz: |
|