Roughness Parameters Calculation By Means Of On-Line Vibration Monitoring Emerging From AWJ Interaction With Material
| Autor: | Hreha Pavol, Radvanska Agata, Knapcikova Lucia, Królczyk Grzegorz M., Legutko Stanisław, Królczyk Jolanta B., Hloch Sergej, Monka Peter |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2015 |
| Předmět: | |
| Zdroj: | Metrology and Measurement Systems, Vol 22, Iss 2, Pp 315-326 (2015) |
| Druh dokumentu: | article |
| ISSN: | 2300-1941 2015-0024 |
| DOI: | 10.1515/mms-2015-0024 |
| Popis: | The paper deals with a study of relations between the measured Ra, Rq, Rz surface roughness parameters, the traverse speed of cutting head v and the vibration parameters, PtP, RMS, vRa, generated during abrasive water jet cutting of the AISI 309 stainless steel. Equations for prediction of the surface roughness parameters were derived according to the vibration parameter and the traverse speed of cutting head. Accuracy of the equations is described according to the Euclidean distances. The results are suitable for an on-line control model simulating abrasive water jet cutting and machining using an accompanying physical phenomenon for the process control which eliminates intervention of the operator. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|