| Autor: |
Miroslav Variny, Lukas Hlavatý, Tomáš Soták, Zuzana Magyarová |
| Jazyk: |
angličtina |
| Rok vydání: |
2023 |
| Předmět: |
|
| Zdroj: |
Engineering Proceedings, Vol 56, Iss 1, p 57 (2023) |
| Druh dokumentu: |
article |
| ISSN: |
2673-4591 |
| DOI: |
10.3390/ASEC2023-15307 |
| Popis: |
Asymmetric ethers such as Cyclopentyl Methyl Ether (CPME) found their application as alternative solvents in technology; they are often labeled as “green solvents” as they can be prepared using renewable feedstock. They are almost immiscible with water and can be easily regenerated. Based on earlier experiments with CPME preparation in laboratory conditions and the estimated product yields, an initial assessment of the reaction mixture separation train was performed, for the chosen production capacity of 100 kg·h−1 of CPME. Following suitable thermodynamic model selection, basic analyses in Aspen Plus software were executed. Reactor effluent containing eight chemical species was subjected to multiple separation steps including extraction and several rectifications including one vapor phase compression step to yield saleable products with sufficient purity and unreacted chemicals recyclable to the reactor. Basic simulations were performed to find the optimal working conditions of individual columns and to estimate the associated energy needs. Basic design, without any heat or work integration measures, required a total heating duty of 787 kW and a total cooling duty of 614 kW. This yielded a specific heat consumption of 28.3 GJ per ton of the main product (CPME) which is unacceptably high as it represents around 70% of its chemical energy content (heating value). Further research will be devoted to reducing heating and cooling duty by integrated separation train design development to comply with the reduced carbon footprint mandatory for the syntheses and separations of green solvents. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
