| Autor: |
Kaushikk Ravender Iyer, Hamid Roozbahani, Marjan Alizadeh, Heikki Handroos |
| Jazyk: |
angličtina |
| Rok vydání: |
2022 |
| Předmět: |
|
| Zdroj: |
Energy Reports, Vol 8, Iss , Pp 11139-11150 (2022) |
| Druh dokumentu: |
article |
| ISSN: |
2352-4847 |
| DOI: |
10.1016/j.egyr.2022.08.255 |
| Popis: |
The objective of this research was to investigate utilizing small to medium-scale wind energy in domestic heating without considerable losses by direct conversion of the wind energy to thermal energy through a hydraulic medium. For this purpose, the virtual wind turbine mathematical model was developed in Simulink. Using hardware-in-the-loop (HIL) simulation, the Simulink model was integrated with dSPACE to control the AC motor connected to a variable displacement pump. The speed of the motor was controlled using a frequency converter, to which the torque of the virtual turbine model was supplied in real-time, and the angular velocity of the motor was fed back to the system. By regulating the valve orifice, a pressure drop was created across the orifice area, which led to the generation of thermal power. In order to validate the real-time simulated turbine, the output power and the characteristic curve of the tip speed ratio (λ) based on the power coefficient (CP) resulted from the real-time simulation were reconciled with the corresponding curves of the real turbine. The results demonstrated the conformity of the real-time simulation with the real turbine. The thermal power produced was measured by measuring the temperature of the hydraulic oil. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
