Vibration Analysis of Circular Arch Element Using Curvature
| Autor: | H. Saffari, R. Tabatabaei, S.H. Mansouri |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2008 |
| Předmět: | |
| Zdroj: | Shock and Vibration, Vol 15, Iss 5, Pp 481-492 (2008) |
| Druh dokumentu: | article |
| ISSN: | 1070-9622 1875-9203 |
| DOI: | 10.1155/2008/149393 |
| Popis: | In this paper, a finite element technique was used to determine the natural frequencies, and the mode shapes of a circular arch element was based on the curvature, which can fully represent the bending energy and by the equilibrium equations, the shear and axial strain energy were incorporated into the formulation. The treatment of general boundary conditions dose need a consideration when the element is incorporated by the curvature-based formula. This can be obtained by the introduction of a transformation matrix between nodal curvatures and nodal displacements. The equation of the motion for the element was obtained by the Lagrangian equation. Four examples are presented in order to verify the element formulation and its analytical capability. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|