Phosphorus collectors from filter paper and synthetic cloth coated with iron or aluminium oxide to provide phosphorus by diffusion in soils
| Autor: | Eduardo Bernardi Luchese, Ervim Lenzi, Luzia Otília Bortotti Favero, Luceide Heloisa Loubak |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2000 |
| Předmět: | |
| Zdroj: | Brazilian Archives of Biology and Technology, Vol 43, Iss 2, Pp 173-179 (2000) |
| Druh dokumentu: | article |
| ISSN: | 1516-8913 1678-4324 |
| DOI: | 10.1590/S1516-89132000000200006 |
| Popis: | Phosphorus collectors made from filter paper and synthetic cloth, were tested to evaluate their feasibility of determining the need for phosphate application. The collectors were coated with two types of oxides, iron oxide and aluminium oxide. The capacity of the collectors was tested by placing them in a 2 mL of solution containing phosphorus (PO4(3-)) in the concentration of 0.0, 1.00, 3.00, 5.00, 7.00, 9.00 and 11.00 µ g.mL-1, respectively, after which they were placed in contact with four types of soil (LBa, LRd, LEd and Ca) and incubed for 0.0 and 24 h. In this test the soils were kept at a humidity equivalent to 150 mmHg suction. The amount of phosphorus extracted from the solutions was tested at intervals between 0,0 and 11.0 µ g of phosphorus/mL. Results indicated that collectors were most efficient in Dystrophic Dark-Red Latosol (LEd) and less efficient in "Bruno álico" Latosol (LBa) and Cambisol (Ca). Synthetic cloth was the support yielding the best performance, whereas iron oxide lining was the most adequate lining material. Phosphorus collection increased with time of incubation.Coletores de fósforo feitos de papel filtro e pano sintético (perfex) foram usados no estudo da determinação da necessidade de adubação fosfatada. Foram preparados coletores impregnados com óxido de ferro e outros com óxido de alumínio. A capacidade foi testada colocando-os em 2 mL de uma solução padrão de fósforo (na forma de fosfato) com 0,0; 1,00; 3,00; 5,00; 7,00; 9,00 e 11;00 µg.mL-1 , depois foram colocados em contato com 4 tipos de solos (Lba, LRd, Led e Ca) e incubados por 0,0 e 24 horas. No teste, os solos foram mantidos com uma umidade equivalente a 150 mmHg de sucção. Os resultados mostraram que os coletores foram mais eficientes, na extração de fósforo, no solo LED e menos eficiente no LBa e Ca (Cambissolo). O pano sintético foi a matriz (material suporte) que proporcionou melhores resultados. O óxido de ferro foi o substrato foi o mais adequado. O teor de fósforo extraído é função direta do tempo de incubação. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|