| Autor: |
Luciano Afferrante, Guido Violano, Giuseppe Carbone |
| Jazyk: |
angličtina |
| Rok vydání: |
2023 |
| Předmět: |
|
| Zdroj: |
Scientific Reports, Vol 13, Iss 1, Pp 1-11 (2023) |
| Druh dokumentu: |
article |
| ISSN: |
2045-2322 |
| DOI: |
10.1038/s41598-023-39932-7 |
| Popis: |
Abstract Modeling the adhesion of viscoelastic rough surfaces is a recent challenge in contact mechanics. Existing models have primarily focused on simple systems with smooth topography or single roughness scale due to the co-action of roughness and viscoelasticity leading to elastic instabilities and rate-dependent behavior, resulting in complex adhesion dynamics. In this study, we propose a numerical model based on a finite element methodology to investigate the adhesion between a randomly rough profile and a viscoelastic half-plane. Approach-retraction simulations are performed under controlled displacement conditions of the rough indenter. The results demonstrate that viscous effects dampen the roughness-induced instabilities in both the approach and retraction phases. Interestingly, even when viscous effects are negligible, the pull-off stress, i.e., the maximum tensile stress required to detach the surfaces, is found to depend on the stiffness modulus and maximum load reached during the approach. Furthermore, when unloading is performed from a relaxed state of the viscoelastic half-plane, both adhesion hysteresis and pull-off stress are monotonic increasing functions of the speed. Conversely, when retraction begins from an unrelaxed state of the material, the maximum pull-off stress and hysteretic loss are obtained at intermediate velocities. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
|
Nepřihlášeným uživatelům se plný text nezobrazuje |
K zobrazení výsledku je třeba se přihlásit.
|
