Soil Moisture Profiles of Unsaturated Colluvial Slopes Susceptible to Rainfall-Induced Landslides
| Autor: | Paolo Paronuzzi, Marco Del Fabbro, Alberto Bolla |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2021 |
| Předmět: | |
| Zdroj: | Geosciences, Vol 12, Iss 1, p 6 (2021) |
| Druh dokumentu: | article |
| ISSN: | 12010006 2076-3263 |
| DOI: | 10.3390/geosciences12010006 |
| Popis: | In this work, we describe soil moisture profiles related to typical colluvial slopes that were involved in rainfall-induced shallow failures occurring in alpine and pre-alpine areas of the Friuli Venezia Giulia Region (NE Italy). The trend of the volumetric water content (θw) showed a general increase from the ground surface to the bottom soil layer, with two or three marked moisture peaks. The saturation degree (S) varied from 65–70% (topsoil horizon) to nearly saturated basal colluvium (S = 95–100%). Soil moisture data demonstrates that, for a very humid climate, colluvial covers are often close to the saturation condition for most of the year. The calculated suction profiles indicated that maximum values ranging from 40 to 55 kPa often occur in the slope surficial soil (depth < 0.2–0.5 m). This negative pore-water pressure greatly decreases after a heavy rainfall event because of the infiltration process. Complete saturation of colluvial cover in the alpine and pre-alpine regions generally requires rainfall exceeding 150–200 mm for a 24-h storm duration. This results in a recurrence time of Tr ≅ 5–10 years for critical rainfall episodes involving colluvial slopes in the Friuli Venezia Giulia Region. The case histories analyzed demonstrate the importance of performing a detailed lithostratigraphic analysis of the colluvial deposit in order to properly define the suction measurement points, which there should be more of than the three-point determinations usually reported in the literature (for example, z = 0.5, 1.0 and 1.5 m). |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|