| Autor: |
Kouji MATSUO, Yoshitomo SUZUKI, Junichi HONGU, Daisuke IBA, Ichiro MORIWAKI |
| Jazyk: |
angličtina |
| Rok vydání: |
2020 |
| Předmět: |
|
| Zdroj: |
Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol 14, Iss 7, Pp JAMDSM0098-JAMDSM0098 (2020) |
| Druh dokumentu: |
article |
| ISSN: |
1881-3054 |
| DOI: |
10.1299/jamdsm.2020jamdsm0098 |
| Popis: |
The present paper describes a method for determining geometries of gear-honing wheels used in the final process for manufacturing automotive transmission gears. Inappropriate geometries of gear-honing wheels could cause large undulations on finished gear-tooth flanks, and the finished gear would be out of the required accuracy. In such cases, the geometries of gear-honing wheels are required to be modified iteratively until the finished gears have sufficient accuracy. The change in meshing stiffness of a gear-honing wheel and a finished gear significantly affects the rotational synchronization. The poor rotation synchronization could cause the large undulation on a finished gear-tooth flank, to be different from the target micro geometries. This paper presented a geometrical approach that was proposed for a determination method of gear-honing-wheel geometries. The method allows the meshing stiffness to be balanced. Gear-honing wheels designed with the proposed method induced the desired micro geometries of finished gear-tooth flanks in gear-honing experiments. Therefore, the proposed method with the geometrical approach could be useful for the determination of gear-honing-wheel geometries. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
