Design and Investigation of Orthogonal Hybrid Dual-Mode Single-CDR-Based MIMO Antenna With High Self-Isolation at 5.8GHz

Autor: Samira Mekki, Atul Varshney, Djamel Sayad, Issa Elfergani, Hanane Bendjedi, Mohamed Lamine Bouknia, Rami Zegadi, Jonathan Rodriguez, Merih Palandoken, Kamil Karacuha, Chemseddine Zebiri
Jazyk: angličtina
Rok vydání: 2024
Předmět:
Zdroj: IEEE Access, Vol 12, Pp 187234-187254 (2024)
Druh dokumentu: article
ISSN: 2169-3536
DOI: 10.1109/ACCESS.2024.3467035
Popis: In this article, a dual-port single-element coaxial probe-fed cylindrical dielectric resonator MIMO antenna is designed and investigated. The high-permittivity dielectric ( ${\varepsilon }_{\mathrm {r}}=15$ ) is composed of barium-titanate-doped polydimethylsiloxane (PDMS) silicone polymer. The orthogonal excited antenna generates orthogonal modes ( $\mathrm {H}\mathrm {E}_{11\delta }^{\mathrm {x}}$ and $\mathrm {H}\mathrm {E}_{11\delta }^{\mathrm {y}}$ ) with high port-to-port self-isolation ( $\lt -21$ dB) without additional mutual coupling reduction structures. The antenna achieved bandwidths are 5.65–5.96 GHz (gain: 8.91 dBi) and 5.62–5.92 GHz (gain: 8.97 dBi) for Port1 and Port2, respectively. It has an axial ratio >26.5 dB, ensuring orthogonal linear polarization characteristics and improved isolation. The antenna attains excellent MIMO parameters; TARC $\lt -10$ dB, VSWR-MIMO $\sim ~10$ dB, CCL $\lt \pm 3$ dB in operating bandwidth. The HFSS simulated and investigated performance parameters of the MIMO antenna are found to be in excellent agreement with experimental data, this validates the antenna’s MIMO functionality. The antenna is modeled as a parallel RLC equivalent circuit in ADS using a novel technique based on complex-valued impedance parameters (Zij). This approach demonstrates improved accuracy, validated by both simulations and measurements. The antenna is suitable for ISM (5.725–5.85 GHz), WLAN 5.8 GHz, C-band (5.0–6.0 GHz).
Databáze: Directory of Open Access Journals