| Autor: |
Zeeshan Khan, Muhammad Altaf Khan, Saeed Islam, Bilal Jan, Fawad Hussain, Haroon Ur Rasheed, Waris Khan |
| Jazyk: |
angličtina |
| Rok vydání: |
2017 |
| Předmět: |
|
| Zdroj: |
Mathematics, Vol 5, Iss 2, p 27 (2017) |
| Druh dokumentu: |
article |
| ISSN: |
2227-7390 |
| DOI: |
10.3390/math5020027 |
| Popis: |
Wire coating process is a continuous extrusion process for primary insulation of conducting wires with molten polymers for mechanical strength and protection in aggressive environments. Nylon, polysulfide, low/high density polyethylene (LDPE/HDPE) and plastic polyvinyl chloride (PVC) are the common and important plastic resin used for wire coating. In the current study, wire coating is performed using viscoelastic third grade fluid in the presence of applied magnetic field and porous medium. The governing equations are first modeled and then solved analytically by utilizing the homotopy analysis method (HAM). The convergence of the series solution is established. A numerical technique called ND-solve method is used for comparison and found good agreement. The effect of pertinent parameters on the velocity field and temperature profile is shown with the help of graphs. It is observed that the velocity profiles increase as the value of viscoelastic third grade parameter β increase and decrease as the magnetic parameter M and permeability parameter K increase. It is also observed that the temperature profiles increases as the Brinkman number B r , permeability parameter K , magnetic parameter M and viscoelastic third grade parameter (non-Newtonian parameter) β increase. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
