Autor: |
Japheth Obiko, Brendon Shongwe, Nicholas Malatji, Michael Bodunrin, Desmond Klenam |
Jazyk: |
angličtina |
Rok vydání: |
2024 |
Předmět: |
|
Zdroj: |
Scientific African, Vol 25, Iss , Pp e02265- (2024) |
Druh dokumentu: |
article |
ISSN: |
2468-2276 |
DOI: |
10.1016/j.sciaf.2024.e02265 |
Popis: |
This paper presents results on the effect of aspect ratio on the flow stress of 42CrMo4 steel using Deform™ 3D Version 11 simulation software. The FEM simulation process conditions were upsetting temperature of 1000 °C and 10 s⁻¹ strain rate. The sample aspect ratios (height/diameter) varied within commonly used ranges during conventional Gleeble experimentations. The aspect ratio did not affect the flow stress behaviour during forming. Generally, the forming conditions influence the flow stress-strain field and distribution behaviour, causing inhomogeneous deformation. A negligible effect of aspect ratio on typical industrial forging process is only attainable between 1.0 and 2.0. The implications of the results for industrial forging are elucidated. |
Databáze: |
Directory of Open Access Journals |
Externí odkaz: |
|