| Autor: |
Chu Guoliang, Lv Huimin, Shi Shengyao, Li Tianxiang, Tang Dong |
| Jazyk: |
English<br />French |
| Rok vydání: |
2024 |
| Předmět: |
|
| Zdroj: |
E3S Web of Conferences, Vol 522, p 01011 (2024) |
| Druh dokumentu: |
article |
| ISSN: |
2267-1242 |
| DOI: |
10.1051/e3sconf/202452201011 |
| Popis: |
With the diesel particulate filter more and more widely applied on engine, the particulate matter (PM) sensor is used to detect malfunctions of diesel particulate filter (DPF) in on board diagnostics (OBD). This paper focused on the new leakage current particulate matter sensor, which has more practical significance. The electric field and flow field were simulated by the COMSOL Multihysics, and the influence rules of sensor electrode parameters on the electric field and flow field were analyzed. The dynamic characteristics of particulate matters with different charges was studied. The simulation results showed that the average electric field strength was higher with higher electrode voltage and larger electrode spacing, which made the motion trend of charged particulate matter to electrodes more obvious. The decrease of electrode spacing or the increase of electrode length made the exhaust flow more stable, and the motion trend of charged particulate matters to electrodes is more obvious with the increase of electrode length. It was concluded that the flow of the exhaust and particulate matter was in good condition when the electrode spacing was 12.5mm, the electrode length is 12.5mm and the electrode voltage ranged between 1000V and 1500V. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
