Influence of sintering behavior on the microstructure and electrical properties of BaTiO3 lead-free ceramics from hydrothermal synthesized precursor nanoparticles
| Autor: | Do Viet On, Le Dai Vuong, Truong Van Chuong, Dao Anh Quang, Ho Van Tuyen, Vo Thanh Tung |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2021 |
| Předmět: | |
| Zdroj: | Journal of Advanced Dielectrics, Vol 11, Iss 2, Pp 2150014-1-2150014-10 (2021) |
| Druh dokumentu: | article |
| ISSN: | 2010-135X 2010-1368 2010135X |
| DOI: | 10.1142/S2010135X21500144 |
| Popis: | BaTiO3 nanoparticles were synthesized by hydrothermal method using amorphous phase TiO2 precursor as the Ti-source. The microstructure and phase structure were determined using XRD, SEM and Raman spectroscopy analysis results. The results showed that BaTiO3 nanoparticles have tetragonal structure, average size of about 100 nm was obtained at Ba/Ti ratio of 1.5, synthesis temperature of 200∘C and reaction time of 12 h. The components of the BaTiO3 lead-free ceramic system are fabricated by conventional solid-phase reaction from the average size BaTiO3 particles about 100 nm obtained by hydrothermal process. The effects of sintering behavior on dielectric, ferroelectric and piezoelectric properties of BT high-density ceramic were studied. The BaTiO3 ceramic composition sintered at 1300∘C has a relative density of 97%, the value of the electromechanical coefficient kp = 0.40, k33 = 0.42, the large piezoelectric coefficient d33 = 300 pC/N, d31 = −125 pC/N. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|