| Autor: |
Sandra VELIČKOVIĆ, Blaža STOJANOVIĆ, Aleksandar VENCL, Miroslav BABIĆ, Dragan DŽUNIĆ, Marko PANTIĆ, Veljko ŠLJIVIĆ |
| Jazyk: |
angličtina |
| Rok vydání: |
2019 |
| Předmět: |
|
| Zdroj: |
Proceedings on Engineering Sciences, Vol 1, Iss 1, Pp 115-123 (2019) |
| Druh dokumentu: |
article |
| ISSN: |
2683-4111 |
| DOI: |
10.24874/PES01.01.016 |
| Popis: |
The paper presents tribological behaviour of aluminium nanocomposite A356/SiC produced by the compocasting process with mechanical alloying preprocessing (ball milling). Tribological tests were performed on tribometer with block-on-disc contact geometry under lubricated sliding conditions. Influence of amount of silicon carbide reinforcement (0, 0.2, 0.3 and 0.5 wt.%) on wear rate was investigated in the following testing conditions: sliding speed of 0.25 and 1.0 m/s, normal load of 40 N and 100 N and at sliding distance of 1000 m. Analysis of worn surface of nanocomposites was performed by using SEM equipped with EDS. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
