Autor: |
Nalinda Dissanayaka, Hamish Alexander, Michael Redmond, Patrick Pearce, Andrew Hobbins-King, Kate Lee, Danilo Carluccio, Roozbeh Fakhr, Luigi-Jules Vandi, James I. Novak |
Jazyk: |
angličtina |
Rok vydání: |
2024 |
Předmět: |
|
Zdroj: |
Annals of 3D Printed Medicine, Vol 15, Iss , Pp 100169- (2024) |
Druh dokumentu: |
article |
ISSN: |
2666-9641 |
DOI: |
10.1016/j.stlm.2024.100169 |
Popis: |
Objective: Non-neurosurgeons in regional and rural hospitals may be required to operate on patients presenting with a traumatic brain injury where timely transfer to a tertiary hospital is not possible. Confidence and experience can vary significantly due to limited access to hands-on training. Increasing availability to advanced 3D printed models opens new opportunities to provide accurate head models suitable for this purpose. This study evaluated the experience of regional clinicians and nurses following a neurotrauma workshop where 3D printed head models were used to provide training in burr hole and craniotomy procedures. Methods: A neurotrauma seminar and workshop was hosted at the Sunshine Coast Health Institute, in the state of Queensland, Australia. The workshop component allowed 26 local clinicians and nurses to gain hands-on experience with a 3D printed head model, guided by neurosurgeons from the closest tertiary hospital. Following training, participants completed a short survey. Results: Prior to this workshop, most participants had never performed a burr hole (58 %, n=15) or interacted with a 3D printed model (69 %, n=18). Overall, most participants indicated that the 3D printed model performed better (58 %, n=15) and much better (15 %, n=4) than their expectations. 81 % (n=21) left the workshop with improved confidence in performing burr hole and craniotomy procedures. Despite some melting of the plastic, 96 % (n=25) of participants would recommend this model to their colleagues. |
Databáze: |
Directory of Open Access Journals |
Externí odkaz: |
|