Effect of light-curing units and activation mode on polymerization shrinkage and shrinkage stress of composite resins
Autor: | Lawrence Gonzaga Lopes, Eduardo Batista Franco, José Carlos Pereira, Rafael Francisco Lia Mondelli |
---|---|
Jazyk: | angličtina |
Rok vydání: | 2008 |
Předmět: | |
Zdroj: | Journal of Applied Oral Science, Vol 16, Iss 1, Pp 35-42 (2008) |
Druh dokumentu: | article |
ISSN: | 1678-7757 1678-7765 |
DOI: | 10.1590/S1678-77572008000100008 |
Popis: | The aim of this study was to evaluate the polymerization shrinkage and shrinkage stress of composites polymerized with a LED and a quartz tungsten halogen (QTH) light sources. The LED was used in a conventional mode (CM) and the QTH was used in both conventional and pulse-delay modes (PD). The composite resins used were Z100, A110, SureFil and Bisfil 2B (chemical-cured). Composite deformation upon polymerization was measured by the strain gauge method. The shrinkage stress was measured by photoelastic analysis. The polymerization shrinkage data were analyzed statistically using two-way ANOVA and Tukey test (p |
Databáze: | Directory of Open Access Journals |
Externí odkaz: |