Evaluation of the penetration capacity of bacteria through layers of different face mask types and wearing conditions

Autor: Alice Kheng, Lara Leclerc, Martin Fayolle, Florence Grattard, Paul O. Verhoeven, Jérémie Pourchez
Jazyk: angličtina
Rok vydání: 2024
Předmět:
Zdroj: Scientific Reports, Vol 14, Iss 1, Pp 1-11 (2024)
Druh dokumentu: article
ISSN: 2045-2322
DOI: 10.1038/s41598-024-76744-9
Popis: Abstract The aim of this study was to quantify the number of non-airborne bacteria that can passively penetrate the layers of four mask types (surgical mask, community face mask type 1 (CFM1), biocidal CFM1 and CFM2) and to determine the influence of wearing conditions for the surgical type. A mask wearer simulator consisting of a 3D anatomical replica of the upper airway connected to a breathing pump was used. Wearing time, filtration quality of the mask, fit (loose vs. tight) and breathing parameters (tidal volume, respiratory rate) were tested. A Staphylococcus epidermidis inoculum was applied to the inner layer. After the wearing simulation, the layers were separated and the bacteria counted. After four hours, no or only a few bacteria were present in the middle and outer layers. Most remained in the inner layer. Surgical mask and CFM1 retained more bacteria and provided a breeding ground for germs. The biocidal CFM1 rapidly reduced the number in the inner layer. The breathing parameters had no influence, in contrast to fit and wearing time. These results confirm that the standard test for bacterial filtration efficiency, which includes the active penetration of airborne bacteria into aerosol droplets, is the most objective measure of the ability of bacteria to penetrate through the mask layers, as the passive penetration ability of non-airborne bacteria is insignificant.
Databáze: Directory of Open Access Journals
Externí odkaz:
Nepřihlášeným uživatelům se plný text nezobrazuje