| Autor: |
Mayank Patel, Nick Hill, Charles A. Mullen, Sampath Gunukula, William J. DeSisto |
| Jazyk: |
angličtina |
| Rok vydání: |
2020 |
| Předmět: |
|
| Zdroj: |
Energies, Vol 13, Iss 19, p 4995 (2020) |
| Druh dokumentu: |
article |
| ISSN: |
1996-1073 |
| DOI: |
10.3390/en13194995 |
| Popis: |
Kraft lignin (Indulin AT) pretreated with magnesium formate and magnesium hydroxide was fast-pyrolyzed in a continuously fed, bench-scale system. To avoid fouling issues typically associated with lignin pyrolysis, a simple laboratory test was used to determine suitable ranges of magnesium hydroxide and formic acid to lignin for feeding without plugging problems. Various feedstock formulations of lignin pretreated with magnesium hydroxide and formic acid were pyrolyzed. For comparison, calcium formate pretreated lignin was also tested. The organic oil yield ranged from 9% to 17% wt % on a lignin basis. Carbon yields in the oil ranged from 10% to 18% wt % on a lignin basis. Magnesium formate pretreatment increased oil yield and carbon yield in the oil up to 35% relative to the higher 1:1 g magnesium hydroxide/g lignin pretreatment. However, a lower magnesium hydroxide pretreatment (0.5:1 g magnesium hydroxide/g lignin) resulted in oil yields and carbon yields in the oils similar to the magnesium formate pretreatments. Magnesium formate pretreatment produced more oil but with a higher oxygen content than calcium formate under the same conditions. The GC-MS analysis of product oils indicated that phenols and aromatics were more prevalent in pyrolyzed magnesium-formate-pretreated lignin. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
|
Nepřihlášeným uživatelům se plný text nezobrazuje |
K zobrazení výsledku je třeba se přihlásit.
|
