Autor: |
Mykola Chausov, Oleg Khyzhun, Janette Brezinová, Pavlo Maruschak, Andrii Pylypenko, Jozef Brezina, Katarína Buzová, Kostiantyn Lopat’ko |
Jazyk: |
angličtina |
Rok vydání: |
2019 |
Předmět: |
|
Zdroj: |
Metals, Vol 9, Iss 6, p 652 (2019) |
Druh dokumentu: |
article |
ISSN: |
2075-4701 |
DOI: |
10.3390/met9060652 |
Popis: |
Improvement in the mechanical properties of sheet two-phase high-strength titanium alloy VT23 due to impact-oscillatory loading and the use of carbon nanosolutions at room temperature was tested experimentally. It was shown that in addition to obtaining a significant increase in the initial plastic deformation of the alloy, it is possible to strengthen the surface layers of the alloy by a factor of 8.4% at a time via the impulse introduction of energy into the alloy and the use of carbon nanosolutions. Using X-ray photoelectron spectroscopy (XPS), it was first found that strengthening of the surface layers of the titanium alloy at a given load, in line with using a carbon nanosolution, leads to the formation of a mixture of titanium oxide and titanium carbide or oxycarbide of type TiO2−xCx on the surface. |
Databáze: |
Directory of Open Access Journals |
Externí odkaz: |
|