Comparison of surface roughness of nanofill and nanohybrid composite resin polished by aluminum oxide and diamond particle paste
| Autor: | Yolanda Y., Dudi Aripin, Opik Taofik Hidayat |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2017 |
| Předmět: | |
| Zdroj: | Padjadjaran Journal of Dentistry, Vol 29, Iss 2 (2017) |
| Druh dokumentu: | article |
| ISSN: | 1979-0201 2549-6212 |
| DOI: | 10.24198/pjd.vol29no2.13659 |
| Popis: | Introduction: The adequate finishing and polishing procedures might occur the restoration longivity, the color retention, and the good integrating with the surrounding environment. Methods: This study was conducted to determine the surface roughness of the nanofill composite with the nanohybrid composite polished by the aluminum oxide pastes and diamond polishing paste. This study was a pure experimental-in vitro study. The results of polishing on the resin composite surfaces was observed using the optical microscope at 500x magnification and given the score. The Krusskal-Wallis test was conducted to depict the data analysis. Result: The results showed that the resin composite group of the nanohybrid polished by both aluminum oxide and diamond particle had smoother surface than the resin composite of the nanofill. Conclusion: The conclusions of this study depicted that there were differences of polishing results using the aluminium oxide and diamond particle paste between the nanofill and nanohybrid resin composite surface roughness. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|