| Popis: |
abstract: Concrete in its macrostructure is a multiphase cementitious composite material, however, by reducing its scale, it is possible to identify the phases that compose it, among the phases are those embedded in the microscale: the hydrated silicates, in the mesoscale: the cement paste, transition zones and aggregates and in the macro phase: the composite itself. Modeling this type of material with two-phase micromechanical models is common in the literature, but there are already proven limitations that two-phase models can provide high modeling errors and are not recommended for this type of study. Faced with this problem, an alternative would be to use multiple-phase models, combined with a multiscale perspective in an attempt to minimize the error in modeling this material. The present paper models the concrete in two different constructions: without an interfacial transition zone and with the inclusion of the interfacial transition zone, verifying the modeling error when neglecting this important phase. The entire homogenization process is performed using the decoupled multiscale technique, obtaining results that rule out the use of two-phase models and methodologies that do not evaluate the interfacial transition zone in conventional concrete. The results obtained with the use of multiple-phase models reduced the relative error to practically zero (compared to experimental tests), demonstrating that micromechanics can be a concrete modeling tool provided that the multiscale process considers as many as possible phases and robust models that take this nature into account. |
