Experimental and theoretical analysis of single-jet column and concrete column using double-jet grouting technique applied at Al-Rashdia site
| Autor: | Al-Khadaar Rana M., Ahmed Mahmood D. |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2024 |
| Předmět: | |
| Zdroj: | Open Engineering, Vol 14, Iss 1, Pp 327-48 (2024) |
| Druh dokumentu: | article |
| ISSN: | 2391-5439 2022-0596 |
| DOI: | 10.1515/eng-2022-0596 |
| Popis: | Progress in jet grouting technology has been focused on the cutting-edge observer of jets, which aims to generate large columns of jet grouting and increase the activity of construction sites. Since jet grouting techniques vary from conventional grouting methods to modern techniques, they can be used in a variety of soil types and their application areas are expanding quickly. So, grouting methods have become very popular methods for subsoil strengthening. This article includes finding the physical and mechanical properties of the soil of the AL-Rashdia site, using a single-jet grouting machine and a steel model to test concrete piles and jet piles, and a double-jet grouting machine to compare the results obtained from laboratory model of one-dimensional jet grouting column pile with those of a one-dimensional concrete pile. The comparison showed that the settlement of the jet pile was smaller than that of the concrete pile and the bearing load was higher with jet columns giving a high bearing capacity comparable with the concrete pile. Shen’s method is more adequate to find the ultimate bearing load and the settlement for this load. Also, the ultimate pile ratio was 115.63% for the jet column, and the ultimate pile ratio for the concrete column was 123.49%. The compressive strength of the core sample of jet columns was large which improved the bearing capacity of the foundation. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|