| Popis: |
The overall number of railcars recorded in the North American railcar fleet from 2010 to 2015 increased about 5%; the number of all 130 tonne (286,000 lb) gross weight railcars (heavy axle load (HAL) railcars) increased 19%. The increase in shipments in short railcars increases the loading on railway bridges, especially the 12.8-m railcars, commonly used to ship sand and cement, which is approximately a 25% increase in load per unit length compared to 16.2-m coal cars. Significant differences between maximum effects of shorter railcars and common 16.2-m railcars were predicted in analysis for bridge spans longer than 18.3 m. The differences were more prominent on spans 24.4 m and longer. This study presents analytical and measured effects of freight railcars on a two-span truss bridge, with spans of 61 m and 33.5 m, and a 35-m riveted steel deck plate girder (DPG) bridge. The investigation confirmed that short railcars cause higher load effects on main bridge components: the 35-m riveted steel DPG has 28% higher stresses at mid-span, while in the truss, the difference in stresses depends on the location of the member and ranges from 15 to 35%. |
