| Autor: |
Nekit Vladimir, Platov Sergey, Krasnov Maksim |
| Jazyk: |
English<br />French |
| Rok vydání: |
2018 |
| Předmět: |
|
| Zdroj: |
MATEC Web of Conferences, Vol 224, p 01104 (2018) |
| Druh dokumentu: |
article |
| ISSN: |
2261-236X |
| DOI: |
10.1051/matecconf/201822401104 |
| Popis: |
The article is devoted the experimental studies of deformation and temperature parameters of rolling the pipe steel on the rolling mill 5000 PJSC “MMK”. Knowledge of the regularities of the change in the surface temperature of work piece during hot rolling under the conditions of thermo mechanical deformation processes is of great theoretical and practical importance. The temperature conditions determine the energy and force parameters of rolling, as well as the mechanical properties and microstructure of the finished products. The experimental rolling was carried out in two stages: roughing at 6 passes at a temperature of 1050-900 ° C and finishing at 18-20 passes at a temperature below the start of the phase transformation of 900 ° C. The finishing rolling has been carried out in a two-phase region at the stage of polymorphic transformation in the steel. Significant differences in the nature of temperature changes at different stages of rolling are revealed. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
