| Popis: |
When designing products that are made of composite materials and that contain natural fillers, it is particularly important to consider the long-term exposure of these materials to caustic liquids and substances (concentrated acids, bases), and to ensure that these products meet strict requirements for reliability and operational safety. This study investigated the effects of different solvents on the mass, mechanical, thermal, surface, and structural properties of polymer composites containing natural fillers in the form of pumpkin seed hulls. Experiments were conducted using four different filler contents (5, 10, 15, and 20 wt%) and grain sizes ranging from 0.2 to 0.4 mm and 0.6 to 0.8 mm. Hybrid injection-moulded pieces were immersed in distilled water (H2O), 1% NaOH solution, acetone (C3H6O), and toluene (C7H8) for 84 days. After that, their mechanical and thermal properties as well as their structure geometries were analysed statistically. Changes in the properties of the tested composite materials were assessed depending on the solvent type, and the statistical significance of these changes were determined. The results showed that the nature of degradation depended on the applied solvent type. It was observed that the polymer matrix of the toluene-immersed samples absorbed the liquid to a significant extent first and then underwent a gradual degradation with time. In contrast, the samples immersed in water showed a slight increase in their mass. It was found that all tested properties of the composite samples deteriorated irrespective of the solvent type. |
