Quality Assessment of Braille Dots Printed by Fused Deposition Modeling 3D Printing Technology
| Autor: | Zuzanna Żołek-Tryznowska, Zuzanna Brzezińska, Ewa Bednarczyk |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2024 |
| Předmět: | |
| Zdroj: | Advances in Sciences and Technology, Vol 18, Iss 6, Pp 321-330 (2024) |
| Druh dokumentu: | article |
| ISSN: | 2080-4075 2299-8624 22998624 |
| DOI: | 10.12913/22998624/191928 |
| Popis: | Braille is a universal tactile writing system for the blind and visually impaired. Braille can be printed in several ways, including embossing, screen, or UV ink-jet printing. In this study, we propose to use three-dimensional, 3D, printing technology to print dots of the Braille alphabet. The 3D model was designed with CAD software and then overprinted with Fused Deposition Modelling, FDM, technology with polylactide filament. Then, the quality of braille dots was assessed according to the standard for Braille. The estimated height (0.5 mm) and diameter (1.3 mm) for Braille dot were not achieved for the designed model. The measured values of the Braille dots were 0.38±0.03 mm and 1.0±0.07 for the height and diameter, respectively. The dot quality was assessed with an optical microscope. The distribution and location of the Braille can be acceptable, but the reproduction of dot shape, curvature, and dimensions is not compatible with the standard for Braille dots. Despite that, Braille is readable, and FDM can be a cheap solution to develop customized and unique plates with Braille imitating conventional Braille dots embossed in cardboard. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|