Autor: |
Jane Maria Faulstich de Paiva, Alexandre De Nadai dos Santos, Mirabel Cerqueira Rezende |
Jazyk: |
angličtina |
Rok vydání: |
2009 |
Předmět: |
|
Zdroj: |
Materials Research, Vol 12, Iss 3, Pp 367-374 (2009) |
Druh dokumentu: |
article |
ISSN: |
1516-1439 |
DOI: |
10.1590/S1516-14392009000300019 |
Popis: |
Carbon fiber reinforced composites (CFRC) have been used in aeronautical industry in the manufacture of different aircraft components that must attend tight mechanical requirements. This paper shows a study involving mechanical (flexural, shear, tensile and compressive tests) and morphological characterizations of four different laminates based on 2 epoxy resin systems (8552TM and F584TM) and 2 carbon fiber fabric reinforcements (Plain Weave (PW) and Eight Harness Satin (8HS)). All laminates were obtained by handing lay-up of prepregs plies (0º/90º) and consolidation in an autoclave following an appropriate curing cycle with vacuum and pressure. The results show that the F584-epoxy matrix laminates present better mechanical properties in the tensile and compressive tests than 8552 composites. It is also observed that PW laminates for both matrices show better flexural and interlaminar shear properties. |
Databáze: |
Directory of Open Access Journals |
Externí odkaz: |
|