| Autor: |
Yi Huang, Shima Sabbaghianrad, Abdulla I. Almazrouee, Khaled J. Al-Fadhalah, Saleh N. Alhajeri, Nian Xian Zhang, Terence G. Langdon |
| Jazyk: |
angličtina |
| Rok vydání: |
2017 |
| Předmět: |
|
| Zdroj: |
Journal of Materials Research and Technology, Vol 6, Iss 4, Pp 390-395 (2017) |
| Druh dokumentu: |
article |
| ISSN: |
2238-7854 |
| DOI: |
10.1016/j.jmrt.2017.07.002 |
| Popis: |
Early published results have demonstrated that high purity Cu and a Pbâ62% Sn alloy exhibit very different behaviour during high-pressure torsion (HPT) processing at room temperature and subsequent room temperature storage. High purity Cu showed strain hardening behaviour with a refined grain structure during HPT processing whereas a Pbâ62% Sn alloy displayed a strain weakening behaviour because the hardness values after HPT processing were significantly lower than in the initial as-cast condition even though the grain size was reduced. During room temperature storage after HPT processing, high purity Cu with lower numbers of rotations softened with the time of storage due to local recrystallization and abnormal grain growth whereas the Pbâ62% Sn alloy hardened with the time of storage accompanied by grain growth. Through comparisons and analysis, it is shown that the low absolute melting point and the high homologous temperature at room temperature in the Pbâ62% Sn alloy contribute to the increase in hardness with coarsening grain size during room temperature storage. Keywords: High-pressure torsion, High purity Cu, Pbâ62%Sn alloy, Self-annealing |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
