INVESTIGATION OF SINGLE-PHASE FLOW CHARACTERISTICS IN A STAGGER PIN-FINS COMPLEX GEOMETRY
| Autor: | R. Shakir |
|---|---|
| Jazyk: | Arabic<br />English |
| Rok vydání: | 2021 |
| Předmět: | |
| Zdroj: | Journal of Engineering and Sustainable Development, Vol 25, Iss 6, Pp 74-81 (2021) |
| Druh dokumentu: | article |
| ISSN: | 2520-0917 2520-0925 |
| DOI: | 10.31272/jeasd.25.6.8 |
| Popis: | The cooling equipment project must use electrical and electronic equipment because of the need to remove the heat generated by this equipment. Investigation; R-113 single-phase flow heat transfer; (50 x 50 mm2) cross-section and (5 mm) height; used in a series of stagger-square micro-pin fins. Inlet temperature of (25 °C); (6) Mass flow rate at this temperature, the recommended range is (0. 0025 -0.01 kg/sec) the inlet and outlet pressures are approximately (1-1.10 bar), and through (25- 225 watts) applied heat. The iterative process is used to obtain the heat flow characteristics, for example; the single-phase heat transfer coefficient is completely laminar flow developing, in this flow, guesses the wall temperature, guess the fluid temperature. The possible mechanism of heat transfer has been discussed. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|