Autor: |
P.V. MuraliKrishna, T. VenkataRamana |
Jazyk: |
angličtina |
Rok vydání: |
2024 |
Předmět: |
|
Zdroj: |
e-Prime: Advances in Electrical Engineering, Electronics and Energy, Vol 10, Iss , Pp 100759- (2024) |
Druh dokumentu: |
article |
ISSN: |
2772-6711 |
DOI: |
10.1016/j.prime.2024.100759 |
Popis: |
Dynamic-time division duplexing (D-TDD) is used in millimeter-wave (mm-wave) networks to allocate time-frequency resources for both downlink (DL) and uplink (UL) transmissions. This scheduling mechanism adapts to varying data traffic to meet the different quality of service (QoS) requirements of heterogeneous services. However, blockage is the major bottleneck to millimeter wave (mm-Wave) networks since it causes signal outages. Moreover, the dense deployment of base stations (BSs) to reduce the signal outage problem may lead to severe interference due to solid line-of-sight (LoS) BSs. To solve the problem of less coverage, this paper utilizes a joint transmission mechanism in the DL of D-TDD-based mm-Wave networks. Further, examining the network performance also entails considering the elevation disparity between the Base Station (BS) and User Equipment (UE). The primary focus of this work is to study the effects of joint transmission in D-TDD-based DL mm-Wave networks with different BS heights and directional beamforming using the stochastic geometry framework. For D-TDD with Joint Transmission, numerical evaluations indicate that the SINR coverage probability reaches approximately 0.7 when the coverage radius (rc) is 100 m. Conversely, at a coverage radius of 200 m, the SINR coverage probability drops to around 0.25. The simulation results demonstrate using MATLAB 2019b tool, that D-TDD-based mm-Wave networks achieve superior coverage using the joint transmission scheme compared to single BS association. Besides, results show that optimal UL and DL split and load balancing are required to achieve better DL coverage. |
Databáze: |
Directory of Open Access Journals |
Externí odkaz: |
|