Influence of the Process Input Parameters on the Cross-Wire Weld Breaking Force
| Autor: | Domagoj Vrtovšnik, Ivana Čabrijan, Marino Brčić, Sandro Doboviček |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2022 |
| Předmět: | |
| Zdroj: | Tehnički Glasnik, Vol 16, Iss 2, Pp 227-230 (2022) |
| Druh dokumentu: | article |
| ISSN: | 1846-6168 1848-5588 20220405 |
| DOI: | 10.31803/tg-20220405195422 |
| Popis: | Cross-wire welding is a type of electric resistance welding called projection welding that is used in the production of a variety of products. This paper deals with the case where steel wires of equal radii are joined together to form a reinforced steel mesh. The objective of the study is to determine the correlation between the welding parameters and the breaking force of the weld. Each weld is cut out from the given wire mesh and tested separately by destructive testing on the universal testing machine. A modular testing fixture was constructed for the tests. Although the tests are still in the initial stage, the results already give a good insight into the influence of the process input parameters on the breaking strength of the weld. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|