| Autor: |
Grabowik Cezary, Kalinowski Krzysztof, Ćwikła Grzegorz, Paprocka Iwona, Kogut Paweł |
| Jazyk: |
English<br />French |
| Rok vydání: |
2017 |
| Předmět: |
|
| Zdroj: |
MATEC Web of Conferences, Vol 112, p 04017 (2017) |
| Druh dokumentu: |
article |
| ISSN: |
2261-236X |
| DOI: |
10.1051/matecconf/201711204017 |
| Popis: |
This paper presents results of tensile tests carried out for specimens made of the selected group of the filament materials. As a manufacturing technology FDM 3D printing method was chosen. The selected group of the filament materials involved the group of wood, PLA, ABS, PET, PMMA and ASA. Herein, it should be noticed, that technical data sheets that are delivered by filament materials producers include data that are valid for only one specific printing direction. This printing direction is deliberately selected, in such way that ensures the best material characteristics. Therefore, received during the research results allow to make comparison between a catalogue data and data obtained in the printing process. It aids both mechanical designer and product manufacturer at the stage of the printed product mechanical properties shaping. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
