| Autor: |
Young Jin Kim, Byung Jin Lee, Kunwoo Yi, Yoon Jae Choe, Min Chul Lee |
| Jazyk: |
angličtina |
| Rok vydání: |
2020 |
| Předmět: |
|
| Zdroj: |
Energies, Vol 13, Iss 22, p 5881 (2020) |
| Druh dokumentu: |
article |
| ISSN: |
1996-1073 |
| DOI: |
10.3390/en13225881 |
| Popis: |
Most of the small modular reactors (SMRs) under development worldwide present the same components: an integral reactor vessel with a low-positioned core as the heat source and a high-positioned steam generator as the heat sink. Moreover, some SMRs are being designed to be driven by natural circulation during normal power generation. This work focused on such designs and on their performance, considering the changes generated by the geometric and hydraulic parameters of the system. Numerical simulations using mass, momentum, and energy equations that considered buoyancy forces were performed to determine the effects of various geometric and hydraulic parameters, such as diameters and flow resistances, on the reactor’s performance. It was found that nonuniform diameters promote velocity changes that affect the natural circulation flow rate. Moreover, the reactor’s temperature distribution depends on the steam generator tube pitch. Therefore, the hydraulic diameters of the reactor’s coolant passages should be maintained as uniform as possible to obtain a more uniform temperature distribution and a larger mass flow rate in SMRs. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
|
Nepřihlášeným uživatelům se plný text nezobrazuje |
K zobrazení výsledku je třeba se přihlásit.
|
