Development of hot rolling technology using the method of physical modeling
| Autor: | A. Zhauyt, A. Bukayeva, Z. Tursymbekova, G. Bulekbayeva, Zh. Begendikova, G. Mambetaliyeva, M. Chazhabayeva |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2021 |
| Předmět: | |
| Zdroj: | Metalurgija, Vol 60, Iss 3-4, Pp 387-390 (2021) |
| Druh dokumentu: | article |
| ISSN: | 0543-5846 1334-2576 |
| Popis: | These days, ensuring the high quality of thin products (0,6 – 2,0 mm) is the most promising direction for the development of hot-rolled strip production. Hot-rolled strips can be used in place of a more expensive cold-rolled strip. The effect of cooling modes on quality of hot-rolled metal was observed heating at different temperature, the degree of deformation was observed after cooling by water-air mixture. It was observed that the micro hardness of the samples decreases and the amount of structurally free ferrite increases by decreasing the cooling time and increasing the temperature. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|