Experimental research procedure of roller forming unit
| Autor: | Viacheslav Loveikin, Kostiantyn Pochka, Maksym Balaka, Olha Pochka |
|---|---|
| Jazyk: | English<br />Russian<br />Ukrainian |
| Rok vydání: | 2023 |
| Předmět: |
unit
forming trolley motion mode force torque power Technological innovations. Automation HD45-45.2 Mechanical industries HD9680-9714 Instruments and machines QA71-90 Descriptive and experimental mechanics QC120-168.85 Information technology T58.5-58.64 Materials of engineering and construction. Mechanics of materials TA401-492 Mining engineering. Metallurgy TN1-997 Earthwork. Foundations TA715-787 |
| Zdroj: | Гірничі, будівельні, дорожні та меліоративні машини, Iss 102 (2023) |
| Druh dokumentu: | article |
| ISSN: | 2312-6590 2709-6149 |
| DOI: | 10.32347/gbdmm.2023.102.0302 |
| Popis: | Experimental research is conducted followed by a comparative analysis of the results, which are obtained in the process of theoretical and experimental studies, to check the theoretical research adequacy of the roller forming unit with the crank drive. We have developed the experimental research program for the roller forming unit with the crank drive. The research stand of roller forming with the crank drive was used for experimental studies. This research stand allows you to carry out full-value experimental studies on the determination of dynamic loads unrestricted. The experimental research program provides the determination of the interaction force for the compaction roller with the construction mixture, the force in the unit connecting rod, the torque on the unit drive shaft and the power, which is necessary for the realization of the forming process. The determination of these loads will make it possible to realistically assess the condition of the forming unit and rationally carry out its design and operation. Plan, procedure and processing of experimental research data have been developed. The measuring and recording equipment were selected to determine the force loads of the research stand for conducting experimental studies, which transforms the received numerical data into Microsoft Excel for their processing. The measurement of the force in the connecting rod and the interaction vertical force of the compaction roller with the construction mixture was carried out using strain gauges. These are pasted according to the bridge scheme on the connecting rod and the metal plate, which is located in the form with the building mixture under the compaction roller. RK 435 universal clamps, which make it possible to measure the line voltage, the current strength and the power under unit different load modes, are used to measure the power required for the forming process. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|