THE USE OF FUZZY LOGIC IN THE STUDY OF DEEP DRAWING CYLINDRICAL PARTS THINNING
| Autor: | Alin Pop |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2017 |
| Předmět: | |
| Zdroj: | Nonconventional Technologies Review, Vol 21, Iss 1 (2017) |
| Druh dokumentu: | article |
| ISSN: | 2359-8646 2359-8654 |
| Popis: | In today's society when competitiveness is one of the main factors that companies should take into account, it is very important that all the factors involved in a manufacturing system should be studied and optimized. The quality of deep drawing parts depends on several factors. It is important to know how these factors will influence the deep drawing process. In this paper it’s studied how the thickness of the parts varies, depending on the radius of the punch, the radius of the die and the blank holder force. By using the fuzzy logic toolbox under Matlab it was made with neuro-fuzzy network with three inputs and one output. The model is built on the basis of experimental tests. The model is built on experimental tests. So it can be identified the areas of minimum thickness of deep drawing part. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|