Forced oscillations of a three-layer plate in an unsteady temperature field
| Autor: | Starovoitov, Eduard Ivanovich, Leonenko, Denis V. |
|---|---|
| Jazyk: | English<br />Russian |
| Rok vydání: | 2024 |
| Předmět: | |
| Zdroj: | Известия Саратовского университета. Новая серия. Серия Математика. Механика. Информатика, Vol 24, Iss 1, Pp 123-137 (2024) |
| Druh dokumentu: | article |
| ISSN: | 1816-9791 2541-9005 |
| DOI: | 10.18500/1816-9791-2024-24-1-123-137 |
| Popis: | The effect of a constant intensity heat flux on forced oscillations of a circular three-layer plate with an asymmetric thickness is investigated. The plate is thermally insulated along the contour and the lower plane. An approximate solution of the thermal conductivity problem was used, obtained by averaging the thermophysical parameters of the materials of the layers over the thickness of the package. According to the Neumann hypothesis, free plate oscillations caused by an instantaneous drop in heat flow are summed up with forced oscillations from the power load. The deformation of the plate package corresponds to the polyline hypothesis. In relatively thin outer bearing layers, Kirchhoff's hypotheses are valid. In sufficiently thick incompressible filler, the deformed normal retains straightness and length, but rotates by an additional angle. The formulation of the corresponding initial boundary value problem includes the equations of motion obtained using the d'Alembert principle and the variational Lagrange method. The initial conditions are assumed to be homogeneous, the contour of the plate is pivotally supported. The analytical solution of an inhomogeneous system of partial differential equations is obtained using the method of expansion into a series according to a system of proper orthonormal functions. As a result, analytical expressions are written out for three desired functions – plate deflection, shear and radial displacement in the filler. An example of oscillations under the action of an instantaneously applied uniformly distributed load is considered. A numerical parametric analysis of the natural oscillation frequencies and the resulting solution depending on the intensity of the heat flux for a plate with layers of titanium alloy, fluoroplast-4, and duralumin is given. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|