| Autor: |
M. L. Gallin-Martel, Y. H. Kim, L. Abbassi, A. Bes, C. Boiano, S. Brambilla, J. Collot, G. Colombi, T. Crozes, S. Curtoni, D. Dauvergne, C. Destouches, F. Donatini, L. Gallin-Martel, O. Ghouini, J. Y. Hostachy, Ł. W. Iskra, M. Jastrzab, G. Kessedjian, U. Köster, A. Lacoste, A. Lyoussi, S. Marcatili, J. F. Motte, J. F. Muraz, T. Nowak, L. Ottaviani, J. Pernot, A. Portier, W. Rahajandraibe, M. Ramdhane, M. Rydygier, C. Sage, A. Tchoualack, L. Tribouilloy, M. Yamouni |
| Jazyk: |
angličtina |
| Rok vydání: |
2021 |
| Předmět: |
|
| Zdroj: |
Frontiers in Physics, Vol 9 (2021) |
| Druh dokumentu: |
article |
| ISSN: |
2296-424X |
| DOI: |
10.3389/fphy.2021.732730 |
| Popis: |
Experimental fission studies for reaction physics or nuclear spectroscopy can profit from fast, efficient, and radiation-resistant fission fragment (FF) detectors. When such experiments are performed in-beam in intense thermal neutron beams, additional constraints arise in terms of target-detector interface, beam-induced background, etc. Therefore, wide gap semi-conductor detectors were tested with the aim of developing innovative instrumentation for such applications. The detector characterization was performed with mass- and energy-separated fission fragment beams at the ILL (Institut Laue Langevin) LOHENGRIN spectrometer. Two single crystal diamonds, three polycrystalline and one diamond-on-iridium as well as a silicon carbide detector were characterized as solid state ionization chamber for FF detection. Timing measurements were performed with a 500-µm thick single crystal diamond detector read out by a broadband amplifier. A timing resolution of ∼10.2 ps RMS was obtained for FF with mass A = 98 at 90 MeV kinetic energy. Using a spectroscopic preamplifier developed at INFN-Milano, the energy resolution measured for the same FF was found to be slightly better for a ∼50-µm thin single crystal diamond detector (∼1.4% RMS) than for the 500-µm thick one (∼1.6% RMS), while a value of 3.4% RMS was obtained with the 400-µm silicon carbide detector. The Pulse Height Defect (PHD), which is significant in silicon detectors, was also investigated with the two single crystal diamond detectors. The comparison with results from α and triton measurements enabled us to conclude that PHD leads to ∼50% loss of the initial generated charge carriers for FF. In view of these results, a possible detector configuration and integration for in-beam experiments has been discussed. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
